CHEVROLET BISCAYNE Recalls
Item Affected: EQUIPMENT:MECHANICAL:JACKS
Date Announced: 07/20/1971
Description of Recall:
Conequence:
Action Need To Fix It:
Notes: CHEVROLET CAMPAIGN NO 71-C-11. STATION WAGONS ONLY. POSSIBIL ITY THAT BUMPERJACK LOAD REST LIP MAY NOT BE PROPERLY FORMED ALLOWING IT TO BEND AND VEHICLESLIP FROM JACK LOAD REST. (CO RRECT BY INSTALLING CORRECT JACK CORRECT JACKWHERENECESSARY. )
Item Affected: TIRES
Date Announced: 11/30/-0001
Description of Recall:
Conequence:
Action Need To Fix It:
Notes: POSSIBILITY THAT FIRESTONE TIRES (8.25 X 14 WHITE SIDEWALL 4-PLY RATED), MAYNOT MEET MINIMUM STRENGTH REQUIREMENTS. FAILURE IN BODY OF TIRE COULD RESULTIN LOSS OF TIRE PRESSURE. (CORRECT BY RE- PLACING ALL TIRES WITH NEW IMPROVEDTYPE.)
Item Affected: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE
Date Announced: 11/30/-0001
Description of Recall: EXHAUST EMISSIONS (CARBON MONOXIDE) MAY ENTER THE INTERIOR OF THE VEHICLE WHEN THE EXHAUST PIPE IS SUBSTANTIALLY OUT THE DESIGN POSITION, DETERIORATED FROM USE, OR WHEN AN OPENING IN THE BODY DEVELOPS NEAR THE EXHAUST OUTLET AND, AT THE SAME TIME, A NEGATIVE AIR PRESSURE OCCURS IN THE VEHICLE INTERIOR.
Conequence: UNDER THESE CONDITIONS, VEHICLE OCCUPANTS MAY EXPERIENCECARBON MONOXIDE POISONING.
Action Need To Fix It: RESEAL NEARBY BODY JOINTS AND REPLACE THE DRAW PLUG IN THE BODY WHICH WAS USED TO REMOVE SURPLUS BONDERIZING SOLUTION DURING MANUFACTURE.
Notes: SYSTEM: EXHAUST.VEHICLE DESCRIPTION: PASSENGER CARS.
Item Affected: STRUCTURE: FRAME AND MEMBERS:UNDERBODY SHIELDS
Date Announced: 11/30/-0001
Description of Recall:
Conequence:
Action Need To Fix It:
Notes: POSSIBILITY THAT FILLER PLATE WAS OMITTED FROM LEFT REAR FLOOR PAN AREA BETWEENBUMPER AND FUEL TANK. IF THIS PLATE IS MISSING IT COULD ALLOW DUST AND, UNDERCERTAIN CONDITIONS, EXHAUST FUMES TO ENTER PASSENGER COMPARTMENT. (CORRECT BYINSPECTING AND INSTALLING FILLER PLATE WHEN NECESSARY.)
