CHEVROLET T-SERIES Recalls
Item Affected: SERVICE BRAKES, AIR:SUPPLY:COMPRESSOR
Date Announced: 07/29/2009
Description of Recall: GM IS RECALLING 1,880 MODEL YEAR 2007 CHEVROLET KODIAK AND T-SERIES, GMC TOPKICK AND T-SERIES, AND ISUZU F-SERIES AND H-SERIES PASSENGER VEHICLES EQUIPPED WITH 7.8L DIESEL ENGINE. THE AIR COMPRESSOR IN SOME OF THESE VEHICLES MAY NOT BUILD ENOUGH AIR PRESSURE TO SUPPORT THE AIR BRAKE SYSTEM. IF THIS CONDITION WERE TO OCCUR WHILE THE VEHICLES WAS STATIONARY (BRAKES APPLIED), THE AIR BRAKES WOULD REMAIN APPLIED AND PREVENT THE VEHICLE FROM MOVING.
Conequence: IF THE DRIVER IGNORES THESE WARNINGS AND CONTINUES TO DRIVE THE VEHICLE, AND IF THERE WAS A CONTINUED LOSS OF PRESSURE, THE REAR SPRING PARKING BRAKES WOULD AUTOMATICALLY APPLY, PREVENTING THE TRUCK FROM BEING DRIVEN.
Action Need To Fix It: DEALERS WILL INSPECT THE AIR COMPRESSOR FOR ITS ABILITY TO BUILD AIR PRESSURE, AND EITHER MODIFY THE AIR COMPRESSOR BY ELIMINATION OF THE SUPPRESSION VALVE OR REPLACE THE AIR COMPRESSOR ASSEMBLY FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN DURING AUGUST 2009. OWNERS MAY CONTACT CHEVROLET AT 1-800-630-2438, GMC AT 1-866-996-9463, ISUZU AT 1-800-255-6727 OR AT WWW.GMOWNERCENTER.COM.
Notes: GM RECALL NO. 09153. OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV .
Item Affected: SERVICE BRAKES, AIR
Date Announced: 08/16/2006
Description of Recall: CERTAIN TRUCKS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS." AN INTERNAL CONTROL AND CHECK VALVE WITHIN THE AIR BRAKE APPLICATION VALVE ASSEMBLY WAS CONFIGURED IMPROPERLY, PREVENTING AIR FROM FLOWING THROUGH THE BRAKE SYSTEM AS DESIGNED. IN THE EVENT OF AN EMERGENCY STOP, THE VEHICLE'S STOPPING DISTANCE WOULD BE INCREASED.
Conequence: IF STOPPING DISTANCE WAS LIMITED, A VEHICLE CRASH COULD RESULT.
Action Need To Fix It: DEALERS WILL REPLACE THE AIR BRAKE APPLICATION VALVE ASSEMBLY ON C-SERIES OR REROUTE THE AIR BRAKE LINES ON T-SERIES FREE OF CHARGE. THE RECALL BEGAN ON SEPTEMBER 20, 2006. OWNERS MAY CONTACT CHEVROLET AT 1-800-630-2438, GMC AT 1-866-996-9463 AND ISUZU AT 1-800-255-6727.
Notes: GM RECALL NO. 06077. CUSTOMERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV.
Item Affected: POWER TRAIN:CLUTCH ASSEMBLY
Date Announced: 02/12/2002
Description of Recall: CERTAIN MEDIUM DUTY TILT CAB TRUCKS EQUIPPED WITH MANUAL TRANSMISSIONS HAVE A CONDITION IN WHICH THE CLUTCH MASTER-CYLINDER PUSHROD END THAT ATTACHES TO THE CLUTCH PEDAL PIN CAN WEAR PREMATURELY. THE FIRST NOTICEABLE EFFECT OF THIS WEAR COULD BE THE CLUTCH PEDAL NOT RETURNING COMPLETELY TO THE FULL-UP POSITION.
Conequence: IF THIS OCCURS, THE FAST-IDLE ENGINE SPEED CONTROL MAY NOT FUNCTION. IF THE CLUTCH MASTER-CYLINDER PUSHROD END WEARS SUFFICIENTLY TO ALLOW THE ATTACHING END TO BEND OPEN OR BREAK OFF, THE PEDAL PIN WOULD DETACH FROM THE CLUTCH ROD LINK AND THE CLUTCH WOULD ENGAGE. IF CLUTCH ENGAGEMENT OCCURRED WHILE THE VEHICLE WAS STOPPED, WITH THE ENGINE RUNNING AND THE TRANSMISSION IN GEAR, AND IF THE BRAKES WERE NOT APPLIED, THE VEHICLE COULD MOVE FORWARD IF THE TRANSMISSION WERE IN A FORWARD GEAR, OR REARWARD IF THE TRANSMISSION WERE IN A REVERSE GEAR.
Action Need To Fix It: DEALERS WILL INSTALL A NEW CLUTCH MASTER-CYLINDER ASSEMBLY AND CLUTCH PEDAL ASSEMBLY. OWNER NOTIFICATION BEGAN APRIL 23, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT CHEVROLET AT 1-800-222-1020 OR GMC AT 1-800-462-8782.
Notes: CUSTOMERS CAN ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
Item Affected: POWER TRAIN:CLUTCH ASSEMBLY
Date Announced: 02/12/2002
Description of Recall: CERTAIN MEDIUM DUTY TILT CAB TRUCKS EQUIPPED WITH MANUAL TRANSMISSIONS HAVE A CONDITION IN WHICH THE CLUTCH MASTER-CYLINDER PUSHROD END THAT ATTACHES TO THE CLUTCH PEDAL PIN CAN WEAR PREMATURELY. THE FIRST NOTICEABLE EFFECT OF THIS WEAR COULD BE THE CLUTCH PEDAL NOT RETURNING COMPLETELY TO THE FULL-UP POSITION.
Conequence: IF THIS OCCURS, THE FAST-IDLE ENGINE SPEED CONTROL MAY NOT FUNCTION. IF THE CLUTCH MASTER-CYLINDER PUSHROD END WEARS SUFFICIENTLY TO ALLOW THE ATTACHING END TO BEND OPEN OR BREAK OFF, THE PEDAL PIN WOULD DETACH FROM THE CLUTCH ROD LINK AND THE CLUTCH WOULD ENGAGE. IF CLUTCH ENGAGEMENT OCCURRED WHILE THE VEHICLE WAS STOPPED, WITH THE ENGINE RUNNING AND THE TRANSMISSION IN GEAR, AND IF THE BRAKES WERE NOT APPLIED, THE VEHICLE COULD MOVE FORWARD IF THE TRANSMISSION WERE IN A FORWARD GEAR, OR REARWARD IF THE TRANSMISSION WERE IN A REVERSE GEAR.
Action Need To Fix It: DEALERS WILL INSTALL A NEW CLUTCH MASTER-CYLINDER ASSEMBLY AND CLUTCH PEDAL ASSEMBLY. OWNER NOTIFICATION BEGAN APRIL 23, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT CHEVROLET AT 1-800-222-1020 OR GMC AT 1-800-462-8782.
Notes: CUSTOMERS CAN ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
