Item Affected: FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
Date Announced: 01/29/1990
Description of Recall: ON C AND K MODELS, FEED AND OR RETURN FUEL LINES CAN CONTACT THE AUTOMATIC TRANSMISSION SHIFT LINKAGE CORDON SHAFT. IN ADDITION, ON K MODELS LINES MAY ALSO CONTACT FRONT PROPSHAFT. IN EITHER CASE THE FUEL LINES COULD BE DAMAGED RESULTING IN A FUEL LEAK.
Conequence: A HOLE COULD BE RUBBED THROUGH THESE FUEL LINES, ALLOWING FUEL LEAKAGE NEAR EXHAUST CROSSOVER PIPE; THIS COULD RESULT IN AN ENGINE COMPARTMENT FIRE THAT COULD SPREAD TO THE PASSENGER COMPARTMENT.
Action Need To Fix It: INSTALL NEWLY DESIGNED FUEL LINE ROUTING BRACKET TO PREVENT CONTACT AND, IF NECESSARY, REPLACE FUEL LINES.
Notes: SYSTEM: FUEL LINES. VEHICLE DESCRIPTION: PICKUP TRUCKS EQUIPPED WITH 6.2 L DIESEL ENGINES.
Item Affected: SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES
Date Announced: 06/04/1990
Description of Recall: LOOSE PIVOT BOLT HOLDING THE BRAKE PEDAL TO ITS SUPPORT BRACKET COULD DISENGAGE FROM THE NUT.
Conequence: THIS COULD CAUSE LOSS OF BRAKING ACTIVITY THAT COULDRESULT IN A TRUCK CRASH WITHOUT PRIOR WARNING.
Action Need To Fix It: RETORQUE BRAKE PEDAL PIVOT BOLTS TO SPECIFICATIONS TO PREVENT LOOSENING.
Notes: SYSTEM: BRAKE PEDAL SUPPORT.VEHICLE DESCRIPTION: LIGHT TRUCKS.
Item Affected: EQUIPMENT:OTHER:LABELS
Date Announced: 05/03/1978
Description of Recall: THE EXISTING CERTIFICATION LABELS CONTAIN INCORRECT RIM SIZE INFORMATION. THIS IS A NON-COMPLIANCE TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 120, "TIRE SELECTION AND RIMS FOR VEHICLES OTHER THAN PASSENGER CARS". THE EXISTING LABELS SPECIFY THE USE OF 16.5X6.00 REAR WHEELS INSTEAD OF THE CORRECT 16.5X6.75 WHEELS.
Conequence:
Action Need To Fix It: A NEW LABEL WILL BE INSTALLED INDICATING THE CORRECT SIZE REAR WHEEL. THIS WILL BE PERFORMED FREE OF CHARGE.
Notes: VEHICLE DESCRIPTION: LIGHT TRUCKS.SYSTEM: EQUIPMENT; CERTIFICATION LABELS.CONSEQUENCES OF DEFECT: USAGE OF THE WHEELS SPECIFIED ON THE EXISTING LABELCOULD RESULT IN WHEEL FAILURE, LOSS OF VEHICLE CONTROL WITHOUT WARNING AND ANACCIDENT.
Item Affected: VEHICLE SPEED CONTROL:ACCELERATOR PEDAL
Date Announced: 10/14/1977
Description of Recall: THE ACCELERATOR PEDAL ROD IN COMBINATION WITH THE PEDAL INSTALLED ON THE INVOLVED VEHICLES MAY CUT THROUGH THE FLOOR PAN RUBBER MAT OR CARPET INTO THE THICK RESILIENT INSULATION PAD UNDERNEATH DURING HEAVY OR REPEATED FULL THROTTLE APPLICATIONS. AS A RESULT, THE ACCELERATOR PEDAL ROD MAY CATCH IN THE MAT OR CARPET, PREVENTING THE THROTTLE FROM RETURNING TO IDLE WHEN THE DRIVER"S FOOT IS REMOVED FROM THE PEDAL.
Conequence:
Action Need To Fix It: DEALER WILL INSTALL A NEW ACCELERATOR PEDAL AND RETAINER DESIGNED TO PREVENT THE ACCELERATOR PEDAL ROD FROM CUTTING THE RUBBER MAT OR CARPET. THIS WILL BE PERFORMED WITHOUT CHARGE.
Notes: VEHICLE DESCRIPTION: LIGHT TRUCKS.SYSTEM: THROTTLE LINKAGES AND CONTROL; ACCELERATOR PEDAL ROD.CONSEQUENCES OF DEFECT: IN THE EVENT THAT THE THROTTLE DOES NOT RETURN TO IDLE,THE VEHICLE WOULD NOT DECELERATE AS EXPECTED AND LOSS OF VEHICLE CONTROL AND ANACCIDENT COULD RESULT.