ISUZU FTR Recalls
Item Affected: PARKING BRAKE:CONVENTIONAL:AIR
Date Announced: 07/13/2006
Description of Recall: CERTAIN MEDIUM DUTY TRUCKS EQUIPPED SR-7 BENDIX BRAKE VALVES, THE CHECK VALVE INSIDE THE VALVE CAVITY MAY NOT PROPERLY SET, CAUSING INTERNAL AIR LEAKAGE. IF THE CHECK VALVE DOES NOT PROPERLY SEAT, THE RESULTING LEAKAGE CAN CAUSE A DELAY IN THE APPLICATION OF THE SPRING BRAKES TO PARK THE VEHICLE AFTER OPERATOR PULLS THE DASH VALVE BUTTON.
Conequence: THE DELAYED PARKING BRAKE APPLICATION CAN OCCUR WITHOUT WARNING, LEADING TO UNINTENDED VEHICLE ROLLAWAY INCREASING THE RISK OF A CRASH.
Action Need To Fix It: DEALERS WILL INSPECT THE VALVES AND REPLACE IT FREE OF CHARGE. THE RECALL BEGAN ON JULY 31, 2006. OWNERS MAY CONTACT CHEVROLET AT 1-800-630-2438, GMC AT 1-866-996-9463, OR ISUZU AT 1-800-255-6727.
Notes: GM RECALL NO. 06054. CUSTOMERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV.
Item Affected: STEERING:LINKAGES:TIE ROD ASSEMBLY
Date Announced: 06/15/2001
Description of Recall: VEHICLE DESCRIPTION: COMMERCIAL VEHICLES EQUIPPED WITH TIE ROD ASSEMBLIES CONTAINING 24-DL MODEL BALL SOCKETS AND MANUFACTURED BY TRW. CERTAIN OF THE TIE ROD BALL-SOCKET BEARINGS HAVE A BELOW-SPECIFICATION CASE DEPTH AND/OR HARDNESS, WHICH CAN LEAD TO PREMATURE WEAR OF THE SOCKET.
Conequence: IF THIS CONDITION OCCURS, THE DRIVER CAN LOSE PARTIAL CONTROL OF THE RIGHT FRONT WHEEL, POSSIBLY RESULTING IN A CRASH.
Action Need To Fix It: DEALERS WILL REPLACE THE DEFECTIVE BALL SOCKETS AND/OR DRAG LINKS. OWNER NOTIFICATION BEGAN DURING MAY 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT ISUZU AT 800-643-4070, EXT. 428.
Notes: ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
Item Affected: STEERING:LINKAGES:LINK:DRAG:CONNECTION
Date Announced: 06/15/2001
Description of Recall: VEHICLE DESCRIPTION: COMMERCIAL VEHICLES EQUIPPED WITH AXLE ASSEMBLIES WHICH MAY HAVE BEEN MANUFACTURED WITH TRW MODEL 20EDL BALL SOCKETS/DRAG LINKS. THE TIE ROD BALL-SOCKET BEARINGS HAVE A BELOW SPECIFICATION CASE DEPTH AND/OR HARDNESS WHICH CAN LEAD TO PREMATURE WEAR OUT OF THE SOCKET IN SOME APPLICATIONS.
Conequence: IF THIS CONDITION OCCURS, THE DRIVER CAN LOSE STEERING CONTROL, POSSIBLY RESULTING IN A VEHICLE CRASH.
Action Need To Fix It: DEALERS WILL REPLACE THE DRAG LINK ASSEMBLIES. OWNER NOTIFICATION BEGAN DURING MAY 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT ISUAU AT 1-800-643-4070, EXT. 428.
Notes: ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
Item Affected: POWER TRAIN:CLUTCH ASSEMBLY
Date Announced: 02/12/2002
Description of Recall: CERTAIN MEDIUM DUTY TILT CAB TRUCKS EQUIPPED WITH MANUAL TRANSMISSIONS HAVE A CONDITION IN WHICH THE CLUTCH MASTER-CYLINDER PUSHROD END THAT ATTACHES TO THE CLUTCH PEDAL PIN CAN WEAR PREMATURELY. THE FIRST NOTICEABLE EFFECT OF THIS WEAR COULD BE THE CLUTCH PEDAL NOT RETURNING COMPLETELY TO THE FULL-UP POSITION.
Conequence: IF THIS OCCURS, THE FAST-IDLE ENGINE SPEED CONTROL MAY NOT FUNCTION. IF THE CLUTCH MASTER-CYLINDER PUSHROD END WEARS SUFFICIENTLY TO ALLOW THE ATTACHING END TO BEND OPEN OR BREAK OFF, THE PEDAL PIN WOULD DETACH FROM THE CLUTCH ROD LINK AND THE CLUTCH WOULD ENGAGE. IF CLUTCH ENGAGEMENT OCCURRED WHILE THE VEHICLE WAS STOPPED, WITH THE ENGINE RUNNING AND THE TRANSMISSION IN GEAR, AND IF THE BRAKES WERE NOT APPLIED, THE VEHICLE COULD MOVE FORWARD IF THE TRANSMISSION WERE IN A FORWARD GEAR, OR REARWARD IF THE TRANSMISSION WERE IN A REVERSE GEAR.
Action Need To Fix It: DEALERS WILL INSTALL A NEW CLUTCH MASTER-CYLINDER ASSEMBLY AND CLUTCH PEDAL ASSEMBLY. OWNER NOTIFICATION IS EXPECTED TO BEGIN DURING APRIL 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT ISUZU AT 1-800-643-4070.
Notes: CUSTOMERS CAN ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
Item Affected: POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT
Date Announced: 02/15/1991
Description of Recall: BEARINGS USED IN THE REAR AXLE HUBS ON THESE VEHICLES ARE IMPROPERLY MACHINED; BEARING COULD SEIZE AT LOW MILEAGES BEFORE SUFFICIENT RUN IN IS ACHIEVED.
Conequence: IF THE BEARING SIEZED, THE AXLE HUB WOULD BE NOISY ATBEST, AND IN THE WORST CASE, THE AXLE SHAFT COULD FALL OUT CAUSING LOSS OFVEHICLE CONTROL WHICH MAY RESULT IN AN ACCIDENT.
Action Need To Fix It: INSTALL NEW REAR WHEEL INNER AND OUTER BEARINGS.
Notes: SYSTEM: REAR AXLE HUBS.VEHICLE DESCRIPTION: HEAVY TRUCKS.NOTE: THIS BEARING CONDITION IS KNOWN TO AFFECT ONLY THE REAR WHEEL AXLEBEARINGS MANUFACTURED BY KOYO. KOYO IS STAMPED ON THE BEARING INNER AND OUTERRINGS FOR IDENTIFICATION.
